English translation for "power curve"

出力曲线
功率曲线
功效曲线
能力曲线
势曲线

Example Sentences:

	1.	Power curve simulation in a stirred tank by using cfd 研究搅拌器的功率曲线
	2.	System can be printed out power curve to facilitate the staff analysis 可打印出制动力曲线图，便于有关人员分析。
	3.	Power curve measurement and analysis for type of axial - flow stirrer 一种高效节能型轴流式搅拌桨功率曲线测定及分析
	4.	The power curve indicates that doubling the wind speed will lead to an eightfold increase in power 功率曲线显示风速加倍将使功率增加8倍。
	5.	The concordance between the output pressure - flow curve and the target constant power curve was validated through tests on cannon hydrostatic driving system , revealing that the self - regulation function of cannon driving system comes true 通过火炮静液压驱动系统的实测实验，验证了输出压力流量曲线与目标恒功率曲线基本一致，实现了对火炮驱动系统的自动调解。
	6.	The apsp produced abroad is made by numerical controlled machine tool , which has noise level of 71db ( a ) , the apsp produced in our country is made in the method of exploratory which has noise level of 73db ( a ) and 75db ( a ) . in order to analyze the influence of stator curve to noise , the author used tri - coordinate measuring instrument to measured exactly the inside surface of stator and got the straddling point coordinate , and made curve fitting by using matlab as language and studied the fitting effect and then worked out the equation of stator transition curve in return seeking , then comparied this method with the standard style and made the conclusion : the equation of atator transiting curve of apsp made by numerical controlled machine tool is close to theorical 5 power curve standard style , but compared with it , the stator transiting curve of apsp produced in exploratory has a major error . combining the testing results of noise , one can know that the qualily of stator transition curve play an importance to t he noise of the pump 国外生产的汽车动力转向泵是用数控机床加工的，其噪声值为71db ( a ) ，国内生产的汽车动力转向泵是用靠模方法加工的，其噪声值分别为73db ( a )和75db ( a ) ，为了分析定子曲线对泵的噪声的影响，本人用三坐标测量仪对定子内表面进行精密测量，获得定子内表面的离散点坐标，以matlab语言为工具对离散点进行曲线拟合，观察拟合效果，然后，用回归方法求出了定子过渡曲线的方程，并把该方程与理论方程标准型进行了比较，得出如下结论：用数控机床生产的汽车动力转向泵的定子过渡曲线方程非常接近理论5次曲线标准型，而用靠模方法加工的汽车动力转向泵的定子过渡曲线与理论5次曲线标准型相比较，则存在着较大的误差，结合噪声测试结果可知，定子过渡曲线的优劣，对泵的噪声大小有着重要的影响。

Similar Words：

"power crossover" English translation, "power cup" English translation, "power curl" English translation, "power current" English translation, "power current fuse" English translation, "power curve model" English translation, "power cut" English translation, "power cut off" English translation, "power cut off relay" English translation, "power cut off switch" English translation